해당내용의영역으로바로가기 메뉴바로가기 서브메뉴바로가기 서브본문내용바로가기

Labs Electrode Manufacturing FacilityCreative & Innovative Systems

Primary Use

  • 1. Advanced Developing secondary battery parts
  • 2. Evaluation & Material Performance

Lab Coater Main Spec._Standard

Micro Graveure + Slot Die Coater
  • ModelLMC-035L6
  • Coating Speed0.5 ~ 2.5 m/min
  • Coating speedMicro Gravure
    +Slot Die Sequential Coating
  • Coating WidthMax. 350mm
  • Drying Zone2.0m x 4 zone = 8.0m
  • Heating SourceElectric Heater
  • Dimension14m(L) x 1.6m(W) x 2.4m(H)
  • Deliver6months
Slot Die & Comma reverse Coater 1F/L
  • ModelCLMC-035L4
  • Coating Speed0.5 ~ 2.0 m/min
  • Coating TypeComma Reverse +
    Slot Die Sequential Coating
  • Drying Zone2.0m x 2 zone = 4.0m
  • Heating SourceElectric Heater
  • Dimension6.5m(L) x 1.6m(W) x 2.4m(H)
  • Delivery5months

Lab Coater List

  • Comma Reverse+Slot Die Coater

  • Heat Insulation Sheet Comma Reverse Coater

  • Air Floating type

  • Roll Supporting type

Lab Calendar Main Spec._Standard

Model : CLP-3040H
  • Pressing RollerØ300mm x 400mm(W)
  • SpeedMax. 5m/min
  • Pressing TypeHeating Type (Thermal Oil)
  • Gap ControlAC Servo Motor & Screw Type
    (Resolution : 0.001mm)
  • Line Pressure1.5 ton/cm
  • Dimension4.5m(L) x 2.5m(W) x 1.8m(H)
  • Deliver5months
Model : CLP-3040H
  • Pressing RollerØ300mm x 400mm(W)
  • Machine Speed2~3m/min
  • Pressing TypeNon-heating type
  • Gap ControlTaper block/ Manual handle type
  • Dimension4.5m(L) x 2.5m(W) x 1.8m(H)
  • Deliver5months
Model : CLP-1015H (Sheet type)
  • Pressing RollerHeating Roll Type
  • Machine Speed0.2 ~ 2.0m/min
  • Heating TempMax. 120℃ [Nor. 80~100℃]
  • Press RollerØ100mm x 150mm(W)
  • Gap ControlManual Type (Resolution : 0.001mm)
  • Dimension0.6m(L) x 0.5m(W) x 0.4m(H)
  • Deliver4months
Model : CLP-2025H (Sheet type)
  • Machine Speed0.5 ~ 2.0 m/min
  • Pressing RollerØ200mm x 250mm(W)
  • Pressing TypeHeating or Non-heating Roll Type
  • Heating TempMax. 120℃ [Nor. 80~100℃]
  • Gap ControlManual Type (Resolution : 0.001mm)
  • Dimension0.7m(L) x 0.7m(W) x 1.5m(H)
  • Deliver4months

Lab Slitter Main Spec._Standard

Model_CLS-040
  • Slitting TypeShear & Block Knife
  • Slitting WidthMax.150mm / 2Lane or Half Slitting
  • Slitting SpeedMax. 5m/min
  • Dimension0.8m(W) x 0.9m(L) x 1.3(H)
  • Delivery4months
Model_CLS-040
  • Slitting TypeShear & Block Knife
  • Slitting Width56mm x 4cut
  • SpeedMax. 10 m/min
  • Dimension1.8m(W) x 1.4m(L) x 1.6(H)
  • Delivery4months